BSI - Page 128/2460

• Norma Técnica BS 2L 81

  Title: Specification for sheet and strip of aluminium-21/4% magnesium alloy (three-quarter hard-H6)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 83

  Title: Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 84

  Title: Specification for bars and extruded sections of aluminium-copper-silicon-magnesium alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 1.5, Si 1, Mg 0.8)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 85

  Title: Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 87

  Title: Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 88

  Title: Specification for aluminium-alloy-coated sheet and strip of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 91

  Title: Specification for ingots and castings of aluminium-copper alloy (165 MN/m2 0.2 per cent proof stress) (Cu 4.5)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 92

  Title: Specification for ingots and castings of aluminium-copper alloy (200 MN/m2 0.2 per cent proof stress) (Cu 4.5)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 93

  Title: Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 95

  Title: Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 97

  Title: Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 98

  Title: Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2L 99

  Title: Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
  Entity: BSI
  Subject: Aluminium

• Norma Técnica BS 2M 41

  Title: Methods of numbering propulsion units and components and describing their direction of rotation
  Entity: BSI
  Subject: Aerospace engines and propulsion systems

• Norma Técnica BS 2M 45-1

  Title: Aircraft tyres and rims. Specification for new tyres, retreads and rims
  Entity: BSI
  Subject: Road vehicle tyres

• Norma Técnica BS 2M 45-2

  Title: Aircraft tyres and rims. Methods of test for tyres
  Entity: BSI
  Subject: Components for aerospace construction

• Norma Técnica BS 2M 46

  Title: Specification for outside diameters and thicknesses of tubing
  Entity: BSI
  Subject: Aerospace fluid systems and components

• Norma Técnica BS 2M 47

  Title: Specification for retreading of cross ply tyres for aircraft
  Entity: BSI
  Subject: Components for aerospace construction

• Norma Técnica BS 2M 49

  Title: Aircraft. Hydraulic components. Marking to indicate fluid for which component is approved
  Entity: BSI
  Subject: Aerospace fluid systems and components

• Norma Técnica BS 2M 50

  Title: Specification for clearance dimensions for tripod jacks for aircraft
  Entity: BSI
  Subject: Ground service and maintenance equipment

• Norma Técnica BS 2M 51

  Title: Classification for pressure and temperature for fluid systems and components
  Entity: BSI
  Subject: Aerospace fluid systems and components

• Norma Técnica BS 2M 52

  Title: Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems
  Entity: BSI
  Subject: Aerospace fluid systems and components

• Norma Técnica BS 2M 53

  Title: Aircraft. Fluid systems. Thermal shock testing of piping and fittings
  Entity: BSI
  Subject: Aerospace fluid systems and components

• Norma Técnica BS 2M 54

  Title: Specification for temperature control in the heat treatment of metals
  Entity: BSI
  Subject: Materials for aerospace construction in general

• Norma Técnica BS 2M 59

  Title: Specification for interface of metric couplings, 24° cone, for aerospace fluid systems
  Entity: BSI
  Subject: Aerospace fluid systems and components

• 123
• 124
• 125
• 126
• 127
• 128
• 129
• 130
• 131
• 132
• 133

---

SEARCH

Standard/Regulation code

Search